The new compact Series 200 Smart electric actuator a bright OLED screen that provides the user with actuator status information, and used in conjunction with external push buttons, allows local control and many parameters and functional adjustment options. Select a tab below for full details. 200Nm torque output, manual override and internal space heater. F07/10 x 22mm ISO 5211 for direct mount to your valve. Available 95-265VAC or 24VAC/DC voltage range. IP67 PC+PET plastic housing with LED status light for Open, Close and Alert for overtorque/ valve jam conditions. Temperature and Humidty sensors. Declutchable manual override selector button.
Needs power to open and power close, stays where it is on loss of external power
The low voltage AV actuator accepts 24V AC or DC, the high voltage version accepts 95-250V AC. Series 200 actuators are supplied with a 2 x conduit entry wiring box.
Taking full advantage of the magnetic position sensing technology, the Series 200 electric actuator is driven to a position proportional to an input control signal. Control signals can be 0-20mA, 4-20mA, 0-5V, 1-5V, 2-10V.
Using the external push buttons in combination with the bright OLED screen, users can pre-set on which day and at which time a Series 200 electric actuator opens, and closes. This eliminates the additional cost of installing timers in systems controlling AV electric actuators.
LED Status light shows current status of the actuator, Green is Open, Red is Closed and Blue is Alarm/Alert.
New for the Series 200-400, declutchable gearbox selector button in cover of actuator.
New for the 200 and 400Nm series, our new Sensor Technology monitors ambient temperature and hummidty. The actuator motor is also being monitored.
With a choice of either an AVA basic providing simple on-off functionality, or an AVA smart actuator providing complex functions, offered in a truly compact housing, select your AVA electric actuator from the ranges below: